Email address:
Password:
I've forgotten my password.

Stages & Structures: SR1410 [ 14m x 10m Roof System ]

At a glance

Options:

- 4m x 6m Cowshed (Tech Wing) on either/both side of stage
- PA and/or Screen Wings (2m, 3m, 4m or 5m width)
- PA cantilevers (1000kg per side)

Structure: ST Truss
Grid Size: 14.9m wide x 10m deep (49’ x 33’)
Towers:  4x TD35 Towers
Main Grid:  ST Truss
Grid Height:  10.6m max (35’)

Our brand new 14m x 10m roof system is a tower based structure with a pitched roof for optimum strength. Constructed largely from standard Eurotruss ST series truss, this large roof system is integrated into a Layher stage structure, which in turn provides a grid clearance of over 10.5m from the deck level, which is generally a nominal height of 2m from ground level. The stage has a central apex height of 12.8m (~14.8m from ground level). Constructed on top of a levelled Layher Allround deck structure the towers and grid are raised using CM Lodestar 1 tonne motors (32A three phase power required). The structure can support up to 5.2 Tonnes of equipment (UDL) over the stage when used outdoors.

The roof is covered in PVC, with a blackout lining, with solid PVC rear and side walls. The standard stage base footprint is a 15m wide x 10m deep platform with handrails fitted to the rear and sides of the platform and with various ramp and step options for access.

PA wings are also available for this structure in widths of either 2m, 3m, 4m or 5m. Each wing can support a point load (such as a hang of line array PA) of up to 2T tonne per side, and can also be used to support an LED video screen.

The structure and all its components are all fully rated, tested and certified, and the construction is signed off by a Eurotruss trained technician prior to handover. Full method statements and risk assessments are adhered to at all times, and guidance on Temporary Demountable Structures, published by the Institute of Structural Engineers (ISE), is followed at all times.

An anemometer (a device used to measure the speed of the wind) is fitted to the structure when used outdoors to continuously monitor wind speed, with procedures in place to deal with inclement weather in accordance with risk assessments, manufacturer data and ISE guidance.